Flow Meters Ireland
You are here > Flow Meters
| Glass Variable Flowmeters |
 LG Series
The LG series are our low cost miniature Glass Tube VA flowmeters for surface panel mounting where small size is important. The RGTF glass flow tubes have 30mm scale length and have standard scales for air. Easy to use, high visibility scale, Simple and reliable. |
 NGX Series
The NG series are our low cost frames for the standard 100mm scale glass tubes. Ideal for panel mounting, the NG series are supplied with mounting studs and a rear facing exhaust vent to safely exhaust process fluid should a tube fail. Models can have rear facing or in-line process connections and the NGV units have a built in needle valve for flow control. Float and scale visibility is improved through the use of a clear polycarbonate cover set against a white background. |
GU Series
The GU series Glass VA flowmeters safety housed construction provides a rigid protective structure around the flow tube, to allow installation in unsupported pipework or to provide extra protection to operators on high pressure or corrosive applications. The tube and float is viewed through a solid Perspex window. |
Glass Tube and Float
The Platon range of Borosilicate Glass flowmeters are based on the well known Variable Area principle of flow measurement. Using various combinations of tubes and floats, thirteen standard gas, and seven liquid sizes are available with scales to suit the application. All tubes are flow tested prior to scale placement, which is fused into the glass to provide clear and long lasting visibility. |
| Plastic Variable Flowmeters |
 GR Series
Plastic
moulded VA flowmeter with 50mm scale and rear facing connections.
Suitable for flush panel or surface mounting, with or
without flow control valve, for air or water ranges.
|
 PG Series
Variable area flowmeters for higher flowrates in 1/2" and 1" pipes, using plastic TPX tubes and Stainless steel or Dural floats. Light open construction with good float visibility. |
 PG Safety Housed
Plastic tube flowmeters in rugged safety housings suitable for unsupported installation in process pipework. Perspex cover retains easy readability but protects operator. |
 DFM Series
All plastic construction variable area flowmeters providing excellent chemical resistance and readability, supplied complete with end connections, either for solvent welding to PVC pipe or threaded. Up to three bi-stable alarms can be fitted to each unit or if required, a 4 to 20mA transmitter is available. |
| Metal Variable Flowmeters |
 Metal Tube Purge Flowmeter
For monitoring low flow rates of high pressure liquids or gases, or where glass tubes are not suitable, purgemeters are Stainless steel in construction with a magnetically coupled pointer. they provide direct flow indication and can be fitted with flow control valves.
Suitable for:
Use where glass flow tubes are not suitable
Purging, mixing or sampling
Low flow/high pressure requirements |
 GMT Metal Tube Flow Indicator
Platon GMT metal tube flowmeters are magnetically coupled VA meters for gasses. Requiring no external power they are robustly constructed for heavy duty, with flanged connections on 1⁄2" to 4" line sizes, and screwed BSP connections on 1⁄2", 1" & 2" units. Within the tapered flow tube, fluid flow lifts the metering element, which contains a magnet. The external pointer follows the magnetic field and indicates flow against a clear 150th scale. Standard units are calibrated for air or water, but scales can be produced to suit other fluids and process conditions. |
 GMTX Metal Tube Flow Transmitter
Platon GMT metal tube flowmeters are magnetically coupled VA meters for liquids. Requiring no external power they are robustly constructed for heavy duty, with flanged connections on 1⁄2" to 4" line sizes, and screwed BSP connections on 1⁄2", 1" & 2" units. Within the tapered flow tube, fluid flow lifts the metering element, which contains a magnet. The external pointer follows the magnetic field and indicates flow against a clear 150th scale. Standard units are calibrated for air or water, but scales can be produced to suit other fluids and process conditions. |
| Shunt Variable Area Flowmeters |
 SGUV Shunt Orifice Flowmeter
Shunt orifice Flowmeters are direct reading flow measurement systems for clean liquids and gases in pipes from 1 1/4" to 24" diameter. By introducing a standard sharp edge orifice plate between flanges on the line, a proportion of the main flow is diverted around the external pipework, through a locally mounted specially calibrated VA meter. The flow through this shunt meter is linearly related to the line flow and is read directly on a linear scale. |
|
Industrial Water Equipment Ltd
2nd Floor, 13 Upper Baggot Street, Dublin 4, Ireland
TEL: + 00 353 15262557
FAX: + 00 353 16865541
info@industrialwaterequipment.ie
-------------------------------------
124 / 126, North Parade, Matlock Bath,
Derbyshire, DE4 3NS
TEL: +44 (0) 1629 580468
FAX: +44 (0)1629 501055
info@industrialwaterequipment.co.uk
| 24Hr
Helpline - Emergency
Number : 07775 661688 |
Sitemap
| Terms
& Conditions of Sale | Returned
Goods Policy |
Payment
Option
|