Water Testers and testing equipment - IWE Ireland

HI96106 - The Original pHep®

pHep®, introduced in 1986, is the smallest and most economical pH meter in the world. It is only 15 cm long, it weighs 85 grams and it is the ideal instrument to perform quick pH measurements.

pHep® is based on the combination of an electrode with an LCD that displays the measurement. The electrode is protected by a rugged epoxy external body and it is supplied with a cap that can be used as a vessel to perform measurements. Simple, precise and rugged, pHep® is the answer to the litmus paper, used many years ago.

This tester family includes 3 models:

• HI 96106 (Champ®): pH tester with one calibration point

• HI 96107 (pHep®): pH tester with one calibration point and ±0.1 pH accuracy

• HI 96108 (pHep®+): combining pHep®'s characteristics with automatic temperature compensation (ATC) and calibration at 2 points. The ATC system measures the temperature of the sample and compensates the pH reading. Precision is increased by this feature even in quick measurements.

HI98103 - pH Tester with Replaceable Electrode

At the cost of just a few rolls of litmus paper, you can have the industry's best pocket-sized pH tester. The Checker® supplies you with fast and accurate readings from 0 to 14 pH with a resolution of 0.01 pH.

This compact tester features a large easy-to-read LCD and simple to perform 2-point calibration. The pH electrode of the Checker® can be replaced. You only need to unscrew the electrode from the meter body and screw on a new one.

The Checker® is fast, accurate, lightweight and with 3000 hours of battery life, you don't have to worry about frequent battery replacement. Testing pH has never been easier!

Please contact us for latest prices

HI9904 - pH Tester for Education, with Replaceable Electrode

HI 99104 is an ideal pocket tester for education. Thanks to its 0.01 pH resolution and two-point manual calibration through easy-to-reach trimmers, it immediately displays pH variations to reflect the smallest change in the sample. Unlike conventional testers, HI 99104 has a long and slim stem, ideal for measurements in small samples or vials.

HI 99104 is supplied with a rugged, plastic body electrode and a screw connector making electrode replacement quick and easy. On top of that, it offers a 1000 hours life with common 1.5V batteries!

HI98106 - Electronic pH Tester with Replaceable Electrode

Introduced in 1986, the pHep® revolutionized pH measurement by providing everyone with a simple, inexpensive pocket pH tester. Thanks to over two decades of manufacturing experience, this series of pH testers has been completely re-designed: today, the pHep® family features a casing that is rugged and ergonomically enhanced to fit your hand.

The design of these testers also features a larger LCD so measurements are easier to read from any angle. Each instrument in the pHep® family comes with a protective cap that can
be used as a measurement vessel. With the latest innovation of a non clogging fiber junction the new pHep® meters last much longer. You can simply pull out 1-2 mm (1/8") of the junction fiber to completely renew it. The temperature sensor of the pHep®+ is exposed for rapid temperature compensation. These testers are the standard in quick, on-the-spot pH testing.

HI 98106 (Champ®) is supplied complete with protective cap, calibration screwdriver, batteries and instructions. HI 98107 (pHep®) is supplied complete with protective cap, calibration screwdriver, batteries and instructions. HI 98108 (pHep®+) is supplied complete with protective cap, calibration screwdriver, batteries and instructions.

HI98127 - Waterproof pH Testers with Replaceable Electrode

When HANNA instruments® introduced it’s first version of the pHep® (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. The pHep®’s ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to measure pH on the spot, accurately and inexpensively throughout a variety of industries. Since its introduction, over 1 million pHep®s have gone to satisfied customers around the world.

We at HANNA instruments® have always valued the comments and suggestions coming from our customers. For this series, we have included all of the features you have asked for and more! The pHep®4 and pHep®5 include features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.

HI 98127 (pHep®4) is supplied complete with protective cap, electrode removal tool, batteries and instructions. HI 98128 (pHep®5) is supplied complete with protective cap, electrode removal tool, batteries and instructions.

HI98111 PICCOLO - pH Tester with ±0.01 Accuracy and Replaceable Electrode

PICCOLO® is a revolutionary pH meter with a 4-in-1 electrode and amplifier. Conventional pH meters are susceptible to the weak high impedance signal which makes the electrode, connector, cable and meter delicate and vulnerable to noise, humidity and dirty environments. PICCOLO® has overcome these problems with a pre-amplified electrode delivering a strong signal to the meter.

The 4-in-1 interchangeable electrode is inexpensive and rugged and houses the pH sensor, reference system, temperature sensor and the amplifier module.
Three models to choose from:

• PICCOLO® with a 9 cm (3.5") electrode (HI 1280).
  
• PICCOLO® 2 with a 16 cm (6.3") electrode (HI 1290).
  
• PICCOLO® plus with a 16 cm (6.3") electrode (HI 1295) and temperature readout directly on LCD.
• All PICCOLO® models are supplied complete with pH electrode, pH 4.01 & pH 7.01 sachets, calibration screwdriver, batteries, rugged carrying case and instructions.
• HI 98111 (PICCOLO®) is supplied with 90 mm (3.5”) HI 1280 amplified pH electrode
• HI 98112 (PICCOLO®2) is supplied with 160 mm (6.3”
• HI 98113 (PICCOLO® plus) is supplied with 160 mm (6.3”) HI 1295 amplified pH electrode

HI98109 - pH Tester for Skin

The health and beauty industry has been searching for a professional product that can determine the pH value of scalp, hair strands and skin quickly, accurately and inexpensively.

HANNA instruments® offers the Skincheck™, the first pH meter that makes it possible for you to easily measure pH in this application. Skincheck™ measures pH in just a few seconds with a special flat-tip electrode specifically designed to measure pH on body surfaces. Skincheck™ has a measurement range that covers the full spectrum of hair and skin pH levels. Measurements are quickly displayed on a large easy-to-read LCD with an accuracy of 0.01.

Skincheck™ is an absolute must for Hair Care Specialists, Beauty Salons, Cosmeticians, Beauticians, Dermatologists & The Cosmetic Industry.

HI 98109 (Skincheck™) is supplied complete with HI 1413S/50 pH electrode, calibration screwdriver, batteries and instructions. HI 98110 (Skincheck™1) is supplied complete with HI 1413B/50 pH electrode with 1 m (3.3’) cable, calibration screwdriver, batteries and instructions.

HI981408 - pH Tester for Fertigation Solutions

HI 981408 has been specifically designed to address the needs of operators in hydroponics, greenhouses and nurseries. The meter has all the characteristics necessary to check the pH of the fertilizer mix during preparation.

HI 981408 is sturdy and waterproof. It also floats so that it can be quickly retrieved if accidentally dropped in the tank.

To resolve the problem of frequent battery replacement, our R&D team has produced a meter that will run for 2000 hours continuously on common AA-type batteries (included). This translates into more than 2 years of continuous use up to 2 hours a day, seven days a week! Calibration has been simplified to one-point through a dial on the front of the meter. The outer casing also incorporates a molded eye so you can hang the meter when not in use.

HI 981408 is supplied complete with HI 1219 pH electrode, pH 7 buffer solution, batteries and instructions.